1. Whats the meaning of the yellow filled markings on the road?

A. closing to the obstacle

B. closing narrowed road

C. closing the moving obstacle

D. Marking of approaching a narrow road

Answer：A

2. If a vehicle has the right of way at an intersection but encounters a vehicle cutting in, the driver should _________.

A. Rush to pass

B. Speed up in advance and pass

C. Reduce speed and evade, or stop to yield when necessary

D. Go forward at the normal speed according to the right of way and refuses to evade

Answer：C

3. What is this manipulation device?

A. switch of the turn signal

B. switch of the head lights

C. switch of wiper

D. switch of defogger

Answer：D

4. When passing an unmanned level crossing, the driver should ________.

A. Speed up and pass

B. Reduce speed and pass

C. Maintain the speed and pass

D. Stop, look and pass

Answer：D

5. How to pass this intersection?

A. keep the speed and go through

B. honk to urge

C. reduce speed and go through slowly

D. speed up and go through

Answer：C

6. What pedal is it?

A. clutch pedal

B. accelerator pedal

C. brake pedal

D. handbrake

Answer：C

7. The applicant should apply for the cancelation of the reservation one day in advance if he is unable to take the exam by appointment, the applicant will be judged as failed in the exam if he does not take the exam on the reserved examination time.

A. Right

B. Wrong

Answer：A

8. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer：A

9. What is this manipulation device?

A. the handbrake

B. the air throttle lever

C. the gear lever

D. the clutch lever

Answer：C

10. After a vehicle enters a mountain road, it should pay special attention to the continuous curves sign. In addition, it should voluntarily evade vehicles and pedestrians, reduce speed in a time manner and honk in advance.

A. Right

B. Wrong

Answer：A

11. Driving across the double solid lines is _______

A. rule-breaking act

B. violation of law

C. faulty act

D. violation of regulations

Answer：B

12. You may speed up to go through the intersection in this case.Answer：

A. Right

B. Wrong

Answer：B

13. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer：A

14. Whats the meaning of this sign?

A. driving at reduced speed in the section of 40 meters

B. minimum speed is 40km/hr

C. maximum speed is 40km/hr

D. 40km/hr speed limit ban is lifted

Answer：D

15. When entering an expressway toll gate, the driver should select a gate where _______.

A. There are more vehicles

B. The red light is on

C. The green light is on

D. Service is temporarily suspended

Answer：C

16. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer：A

17. What to do besides controlling speed less than 20km/hr when the visibility is lower than 50 meters on the expressway?

A. run in the emergency lane

B. leave the expressway as soon as possible

C. stop by the roadside as soon as possible

D. run slowly in the road shoulder

Answer：B

18. Driving a motorized vehicle shall not overtake in tunnels, steep slopes and other special sections.

A. Right

B. Wrong

Answer：A

19. Whats the meaning of this sign?

A. no entry for bicycles

B. lane for non-motorized vehicles

C. special lane for bicycles

D. bicycle stopping area

Answer：B

20. Using the low beam light in such circumstances.

A. Right

B. Wrong

Answer：A

21. A motorized vehicle driver who uses falsified and altered license plate is subject to a ________.

A. 2-point penalty

B. 3-point penalty

C. 12-point penalty

D. 6-point penalty

Answer：C

22. Traffic Police can detain the vehicle according to law if it runs on the road failing to place a label of inspection.

A. Right

B. Wrong

Answer：A

23. What is this manipulation device?

A. switch of reverse light

B. switch of wiper

C. switch of the hazard lights

D. combination switch of lights and signals

Answer：D

24. If a motorized vehicle has reached the states mandatory write-off standard, its registration will not be handled.

A. Right

B. Wrong

Answer：A

25. When driving at night, the driver should go at a lower speed because his field of vision is limited and he can hardly observe the traffic conditions beyond the area covered by his vehicle light.

A. Right

B. Wrong

Answer：A