1. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer：B

2. In which situation that a driver will not allowed to drive?

A. penalty points reach 10 points

B. penalty points reach 6 points

C. driving license lost or destroyed

D. driving license is nearly expired

Answer：C

3. Whats the meaning of the double white solid lines in far front of the intersection?

A. stopping and yield line

B. slowdown and yield line

C. left-turn waiting line

D. waiting to run line

Answer：A

4. Whats the meaning of the yellow broken and solid lines in the middle of the road?

A. no crossing the lines on the side of the broken line

B. no crossing the lines on the side of the solid line

C. allowed to cross the lines on the side of the solid line

D. allowed to cross the lines on both sides

Answer：B

5. What is this manipulation device?

A. air conditioner switch

B. ignition switch

C. wiper switch

D. light switch

Answer：B

6. Whats the meaning of the white solid lines at the edge of the carriageway on both sides of the road?

A. Vehicles may cross temporarily

B. Vehicles are not allowed to cross.

C. Motorized vehicles may cross temporarily.

D. Non-motorized vehicles may cross temporarily

Answer：B

7. This sign reminds the road in front changes to inseparate two ways section.

A. Right

B. Wrong

Answer：A

8. It lights to indicate that ______

A. the side fans work

B. air external circulation

C. the front fan works

D. air internal circulation

Answer：C

9. Rear fog light lights when the light switch is at this position.

A. Right

B. Wrong

Answer：A

10. Whats the meaning of this sign?

A. going straight and left turn

B. going straight and right turn

C. no going straight and no right turn

D. left turn and right turn only

Answer：B

11. If a vehicle has the right of way at an intersection but encounters a vehicle cutting in, the driver should _________.

A. Rush to pass

B. Speed up in advance and pass

C. Reduce speed and evade, or stop to yield when necessary

D. Go forward at the normal speed according to the right of way and refuses to evade

Answer：C

12. When a motorized vehicle goes at night through an intersection that has no traffic lights, the driver should not use the high and low beam lights alternately.

A. Right

B. Wrong

Answer：B

13. Whats the meaning of this sign?

A. water channel

B. bridge

C. tunnel

D. Culvert

Answer：C

14. Whats the meaning of this sign?

A. stopping temporarily is allowed

B. long stopping is allowed

C. no long stopping

D. no stopping

Answer：D

15. What kind of violation does this car have while stopping temporarily by the roadside?

A. stop occupying the lane for motorized vehicles

B. stop more than 30cm from the roadside

C. stop in the section with no stopping marking

D. stop occupying the lane for non-motorized vehicles

Answer：C

16. Whats the meaning of the marking in the red circle?

A. temporary stopping

B. bay-stopping

C. emergency stopping

D. public bus station

Answer：B

17. Displays the current speed is 20 km / h

A. Right

B. Wrong

Answer：B

18. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer：B

19. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer：A

20. It lights when turning on the right-turn signal.

A. Right

B. Wrong

Answer：B

21. Whats the meaning of this guide arrow?

A. indicate turning left or making a U turn ahead

B. indicate going straight or turning left ahead

C. indicate going straight or changing to left lane ahead

D. indicate going straight or making a U turn ahead

Answer：D

22. Whats the meaning of this sign?

A. no right turn

B. no U turn

C. no going straight

D. no left turn

Answer：C

23. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer：A

24. When a vehicle changes lane, the driver only needs to turn on the turn signal before rapidly entering the new lane.

A. Right

B. Wrong

Answer：B

25. Reducing the speed when driving in sand, hail, rain, fog, ice and other weather conditions.

A. Right

B. Wrong

Answer：A