黄山考驾照英文试题

1. If a small motor vehicle driver has assumed equal or main liability for a traffic accident causing human deaths, and his driving license has not been revoked, it shall be checked within 30 days after the end of the scoring cycle.

A. Right

B. Wrong

Answer:A

2. The age limit of applying for small vehicle is ________ .

A. 18~60 years old

B. 18~70 years old

C. 24~70 years old

D. 21~50 years old

Answer:B

3. Whats the meaning of this sign?

A. reduce speed and go slowly

B. watch for danger

C. jammed section

D. accident-prone section

Answer:B

4. Whats the meaning of this guide arrow?

A. Y-shaped intersection ahead

B. separate road ahead

C. only left or right turn ahead

D. merging with both sides ahead

Answer:C

5. Whats the meaning of this sign?

A. an unmanned level crossing 150m ahead

B. an unmanned level crossing 100m ahead

C. a manned level crossing 100m ahead

D. a manned level crossing 150m ahead

Answer:A

6. A vehicle is not allowed to reverse on the ramp of an expressway.

A. Right

B. Wrong

Answer:A

7. It lights to remind that engine oil needs to be filled.

A. Right

B. Wrong

Answer:B

8. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer:A

9. What is this manipulation device?

A. switch of reverse light

B. switch of wiper

C. switch of the hazard lights

D. combination switch of lights and signals

Answer:D

10. Driving a motorized vehicle on the road should be required to be with a license plate.

A. Right

B. Wrong

Answer:A

11. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer:D

12. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer:A

13. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer:B

14. Traffic Police can detain the driver according to law, if the driver drives a motorized vehicle which is suspected of reaching the write-off standard.

A. Right

B. Wrong

Answer:B

15. Motor vehicle frontal collision, the double protection of the airbag and the safety belts can give full play to the role.

A. Right

B. Wrong

Answer:A

16. When the vehicles cross each other at night, the driver may continuous change lights to remind the vehicle coming in the opposite direction and at the same should reduce speed and go forward or stop on the right side.

A. Right

B. Wrong

Answer:A

17. A motorized vehicle driver who drives more than 50% faster than the prescribed speed limit is subject to a 12-point penalty.

A. Right

B. Wrong

Answer:A

18. It lights when turning on the right-turn signal.

A. Right

B. Wrong

Answer:B

19. When reaching an intersection, the driver should _____ if a turning vehicle cuts in.

A. Stop to evade

B. Maintain the normal speed

C. Speed up and pass ahead of it

D. Honk and pass ahead of it

Answer:A

20. A motorized vehicle driver who does not hang the license plate is subject to a ________.

A. 6-point penalty

B. 12-point penalty

C. 2-point penalty

D. 3-point penalty

Answer:B

21. The main impact of mountain roads on safe driving is _______.

A. The traffic conditions are boring

B. The slopes are long, the curves are sharp and visibility range is shorter.

C. The traffic flow is heavy

D. The road signs are fewer

Answer:B

22. How long is the period of probation of a motor vehicle driver who has applied for a driver license for the first time?

A. 18 months

B. 16 months

C. 12 months

D. 6 months

Answer:C

23. It lights to remind that engine coolant may be insufficient.

A. Right

B. Wrong

Answer:A

24. What is this manipulation device?

A. the air throttle lever

B. the gear lever

C. the clutch lever

D. the handbrake

Answer:D

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer:C