1. How to do when causing a minor traffic accident with no human casualties and no dispute?

A. do not move the vehicle

B. counsel other vehicles bypass

C. leave the scene and discuss on their own

D. protect the scene and discuss

Answer：C

2. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer：A

3. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer：B

4. In which section cannot overtake?

A. main streets

B. elevated road

C. crosswalk

D. ring express

Answer：C

5. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer：B

6. To hold the steering wheel like this is correct.

A. Right

B. Wrong

Answer：B

7. May not drive if _____

A. the window is not closed

B. the door is not closed

C. the audio device is not closed

D. the roof window is not closed

Answer：B

8. How to pass this intersection?

A. not reduce speed to pass

B. speed up to pass as soon as possible

C. slide over in the neutral gear

D. reduce speed or stop to observe

Answer：D

9. Whats the meaning of this sign?

A. intersection ahead

B. interchange ahead

C. Y-shaped intersection ahead

D. ring intersection ahead

Answer：D

10. When encountering slow-moving vehicles at an intersection that has no traffic signals, the motorized vehicle should pass alternately.

A. Right

B. Wrong

Answer：A

11. Whats the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer：D

12. A vehicle should try to speed up after starting from the roadside and rapidly turn left into the traffic flow on the road.

A. Right

B. Wrong

Answer：B

13. When a vehicle goes uphill on a mountain road, it should change to a lower gear in a timely, accurate and rapid manner so as to avoid a situation in which driving at a high gear can reduce the power of the engine.

A. Right

B. Wrong

Answer：A

14. Whats the meaning of the white broken lines area on the far left side?

A. special lane for multi-passenger vehicles

B. special lane for small buses

C. special lane for taxis with no passenger

D. special lane for large buses

Answer：A

15. Driving a motorized vehicle on the highway which has no central line, the maximum speed can not exceed 70 kilometers per hour.

A. Right

B. Wrong

Answer：B

16. Can leave the expressway into the ramp from this location directly.

A. Right

B. Wrong

Answer：B

17. The traffic lights allow the vehicle to ______

A. turn right

B. stop and wait

C. turn left

D. go straight

Answer：A

18. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer：C

19. Whats the meaning of this sign?

A. a manned level crossing

B. an unmanned level crossing

C. multi-crossing of railway and road

D. yielding the train with care

Answer：C

20. When a vehicle goes down a long slope, it should run at a lower gear and fully use the engine to brake.

A. Right

B. Wrong

Answer：A

21. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer：D

22. Max speed when pass the narrow road or bridge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer：C

23. Full penalty points of a scoring cycle because of violating the traffic regulations is 12 points.

A. Right

B. Wrong

Answer：A

24. Driving and smoking has no harm on safe driving.

A. Right

B. Wrong

Answer：B

25. When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C