1. A vehicle is not allowed to reverse on the ramp of an expressway.

A. Right

B. Wrong

Answer：A

2. A driver should buckled up before the vehicle moves.

A. Right

B. Wrong

Answer：A

3. When driving at night, the drivers visibility range becomes shorter and his observation becomes poorer. At the same time, the driver can easily become tired because he has to highly concentrate his attention.

A. Right

B. Wrong

Answer：A

4. Whats the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer：D

5. How long can a driver drives without rest?

A. less than 6hrs

B. less than 8hrs

C. less than 10hrs

D. less than 4hrs

Answer：D

6. Whats the meaning of this sign?

A. no yielding

B. yield while crossing each other

C. reduce speed and yield

D. stop to yield

Answer：C

7. What marking is the road mark in the circle?

A. crosswalk line

B. slowdown and yield line

C. stopping and yield line

D. intersection signal line

Answer：A

8. If the registration paper, license plate and vehicle license of a motorized vehicle are lost or destroyed, the vehicle owner should apply for reissuing or replacing them to the _______________.

A. traffic police detachment vehicle management station at the residential place

B. vehicle management station at the issuing place of the driving license

C. vehicle management station at the registration place

D. local police station

Answer：C

9. You can overtake from right side in this case.

A. Right

B. Wrong

Answer：B

10. A driver should observe the dynamic situation of the rear side vehicles before driving into the traffic flow from other road.

A. Right

B. Wrong

Answer：A

11. When a vehicle leaves an expressway, it should reduce speed in the deceleration lane before entering the ramp.

A. Right

B. Wrong

Answer：A

12. You should speed up to go through the railway crossing in this case.

A. Right

B. Wrong

Answer：B

13. Whats the meaning of this sign?

A. slippery section

B. sharp curve

C. test driving section

D. curve section

Answer：A

14. Driving motor vehicle with ABS system may occur side skidding when applying emergency braking.

A. Right

B. Wrong

Answer：A

15. The safety pillow is used to protect the driver‘s head when there is a rear-end collision.

A. Right

B. Wrong

Answer：B

16. How far away should the warning sign be placed in the coming direction when this vehicle breaks down and stops temporarily on the expressway?

A. beyond 150m

B. 50~150m

C. within 50m

D. 50~100m

Answer：A

17. Whats the meaning of this sign?

A. continuous down slopes

B. steep downhill road

C. steep uphill road

D. continuous up slopes

Answer：A

18. When a vehicle runs on a narrow mountain road, the driver should ______ if the party close to the mountain mass refuses to yield.

A. Honk to urge the other party to yield

B. Maintain the normal speed

C. Reduce speed or stop to yield

D. Use the left lane and pass with care

Answer：C

19. When passing an intersection without traffic lights, the driver should go through as fast as possible.

A. Right

B. Wrong

Answer：B

20. Traffic Police can detain the vehicle according to law if it uses other vehicles license plate and vehicle license.

A. Right

B. Wrong

Answer：A

21. Driving and smoking has no harm on safe driving.

A. Right

B. Wrong

Answer：B

22. As the traffic flow at an interchange is generally one-way, the vehicles do not have to reduce speed when passing.

A. Right

B. Wrong

Answer：B

23. Besides the administrative punishment, what kind of system implemented by the traffic control department of the public security organ to the driver who violated the traffic regulations?

A. violation registration system

B. mileage reward system

C. mandatory write-off system

D. accumulated penalty points system

Answer：D

24. When driving a motorized vehicle uphill, you should speed up and honk when you going to reach the top of the slope.

A. Right

B. Wrong

Answer：B

25. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer：C