1. It lights to indicate that ______

A. the side fans work

B. air external circulation

C. the front fan works

D. air internal circulation

Answer：C

2. Whats the meaning of this sign?

A. reduce speed and yield

B. variable lane

C. separated road

D. two-way traffic

Answer：D

3. What is the max speed on the expressway when the visibility is lower than 100 meters?

A. less than 40km/hr

B. less than 60km/hr

C. less than 80km/hr

D. less than 90km/hr

Answer：A

4. Whats the meaning of this sign?

A. distance to a tourist area

B. category of a tourist area

C. direction of a tourist area

D. symbol of a tourist area

Answer：C

5. Driving in a dusty weather, it does not needed to turn on the head light, the contour light and the tail light.

A. Right

B. Wrong

Answer：B

6. Driving across the double solid lines is _______

A. rule-breaking act

B. violation of law

C. faulty act

D. violation of regulations

Answer：B

7. What marking is the yellow broken line in the circle?

A. non-motorized vehicles guide lines

B. intersection guide line

C. lane connection lines

D. small vehicles turning lines

Answer：B

8. Must reduce the frequency of honking in this section.

A. Right

B. Wrong

Answer：B

9. It flashes when turning on the hazard lights.

A. Right

B. Wrong

Answer：A

10. What marking is the white semicircle in the circle?

A. driving at reduced speed

B. ascertaining the vehicles speed

C. reducing the speed at the intersection

D. ascertaining the distance between the vehicles

Answer：D

11. What kind of marking is the yellow broken line in the center of the road?

A. indicative marking

B. prohibitive marking

C. warning sign

D. auxiliary marking

Answer：A

12. Whats the meaning of this sign?

A. U turn

B. reversing

C. left turn

D. bypassing

Answer：A

13. When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C

14. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer：C

15. Whats the meaning of this sign?

A. watch for danger

B. bypass from right side

C. bypass from left side

D. one-way pass

Answer：C

16. What is this manipulation device?

A. the handbrake

B. the air throttle lever

C. the gear lever

D. the clutch lever

Answer：C

17. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer：B

18. This sign reminds the road ahead goes through the village or town.

A. Right

B. Wrong

Answer：A

19. What is this traffic sign?

A. slippery section

B. sharp curve

C. inverse curve

D. continuous curves

Answer：D

20. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer：C

21. This sign warns the driver there is school area ahead.

A. Right

B. Wrong

Answer：B

22. A vehicle is not allowed to reverse on the ramp of an expressway.

A. Right

B. Wrong

Answer：A

23. The main impact of the road conditions in icy and snowy weather is ______.

A. The electric equipment can easily get wet and cause short circuit

B. The visibility is lower and the field of vision is blurred

C. The resistance to the vehicle increases

D. Poor braking performance and Side pulling

Answer：D

24. Full penalty points of a scoring cycle because of violating the traffic regulations is 12 points.

A. Right

B. Wrong

Answer：A

25. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer：D