鄂州科目四模拟考试英文版

1. This sign indicates jammed section ahead and passing slowly.

A. Right

B. Wrong

Answer:B

2. A person can not apply the motorized vehicle driving license, if he has been held for criminal liabilities according to law because of driving after drinking and causing a major traffic accident.

A. Right

B. Wrong

Answer:A

3. Which lane to choose when turning left in this intersection?

A. the far left lane

B. middle lane

C. not need to change lane

D. the far right lane

Answer:A

4. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. straight-going lane

Answer:D

5. The light switch is in this position, front fog lights turn on

A. Right

B. Wrong

Answer:A

6. When reaching an intersection, the driver should _____ if a turning vehicle cuts in.

A. Stop to evade

B. Maintain the normal speed

C. Speed up and pass ahead of it

D. Honk and pass ahead of it

Answer:A

7. One can drive the low-speed truck if the authorized vehicle applied for is small motor vehicle with automatic transmission.

A. Right

B. Wrong

Answer:B

8. Which is correct if a vehicle breaks down and is difficult to move?

A. turn on the hazard lights

B. turn on all the lights of the vehicle

C. forbid the passengers to get off

D. place a warning sign in front of the vehicle

Answer:A

9. The red car can run in this lane.

A. Right

B. Wrong

Answer:B

10. This sign indicates ______

A. expressway service area ahead

B. expressway shelter ahead

C. expressway bus station ahead

D. expressway parking area ahead

Answer:D

11. Driving a small passenger vehicle on the expressway, the minimum speed should not be less than 90 kilometers per hour.

A. Right

B. Wrong

Answer:B

12. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer:A

13. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer:A

14. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer:A

15. Whats the meaning of this sign?

A. going straight and left turn

B. going straight and right turn

C. no going straight and no right turn

D. left turn and right turn only

Answer:B

16. When the driver senses a tire blowout on the road, he should control the direction of the vehicle, gently depress the brake pedal to slowly reduce the speed and gradually park the vehicle steadily on the roadside.

A. Right

B. Wrong

Answer:A

17. When causing a road accident involving human casualties, the driver should immediately rescue the injured people and report to the traffic police as soon as possible.

A. Right

B. Wrong

Answer:A

18. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer:C

19. A motorized vehicle is not allowed to stop in the section 50 meters to the intersection.

A. Right

B. Wrong

Answer:A

20. Whats the meaning of the yellow marking on the road?

A. gradual road width

B. more carriageways

C. closing to obstacle

D. construction section indication

Answer:A

21. Whats the meaning of this sign?

A. bypass at construction section

B. two-way traffic

C. bypass from left or right side

D. watch for danger

Answer:C

22. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer:A

23. It lights to indicate that engine compartment is opened.

A. Right

B. Wrong

Answer:B

24. After the green light at an intersection is on, the vehicles may not yield if non-motorized vehicles cut in.

A. Right

B. Wrong

Answer:B

25. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer:B