1. Traffic Police can detain the vehicle which is suspected of using the falsified or altered license plate and vehicle license.

A. Right

B. Wrong

Answer：A

2. What device does the switch of this symbol control?

A. the windscreen defrosting or defogging

B. the rear window wiper and washer

C. the windscreen wiper and washer

D. the rear window defrosting or defogging

Answer：C

3. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer：A

4. When driving on a road covered by ice and snow, the driver must reduce speed and increase the safe distance.

A. Right

B. Wrong

Answer：A

5. What marking is the white broken line on the road?

A. central line of opposite lanes which is prohibited from crossing

B. central line of opposite lanes which is restricted from crossing

C. central dividing line of the one-way road lanes

D. central line of same direction lanes which is allowed to cross

Answer：D

6. Traffic Police can detain the accident vehicle according to law if it needs to be collected evidence of the road accident.

A. Right

B. Wrong

Answer：A

7. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer：A

8. It flashes when breaking down.

A. Right

B. Wrong

Answer：B

9. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer：C

10. In the course of making a U turn, the driver should strictly control the speed, carefully observe the road conditions before and behind the vehicle, and may advance or reverse only if it is safe to do so.

A. Right

B. Wrong

Answer：A

11. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer：B

12. Whats the meaning of this sign?

A. an unmanned level crossing 150m ahead

B. an unmanned level crossing 100m ahead

C. a manned level crossing 100m ahead

D. a manned level crossing 150m ahead

Answer：A

13. Nobody is allowed to drive a motorized vehicle that has safety hazards.

A. Right

B. Wrong

Answer：A

14. At this position, the motorized vehicle can continue to go through if the front wheels have passed the stop line.

A. Right

B. Wrong

Answer：B

15. What kind of marking is the yellow broken line in the center of the road?

A. indicative marking

B. prohibitive marking

C. warning sign

D. auxiliary marking

Answer：A

16. Whats the meaning of this sign?

A. provincial highway No.

B. county road No.

C. township road No.

D. national highway No.

Answer：C

17. What device does the switch of this symbol control?

A. child safety lock

B. window glasses of both sides

C. electric door

D. door unlock

Answer：A

18. These signs warn the driver danger ahead and passing with care.

A. Right

B. Wrong

Answer：A

19. Whats the meaning of this sign?

A. overtaking ban is lifted

B. changing lane is allowed

C. changing lane ban is lifted

D. borrowing lane ban is lifted

Answer：A

20. When a vehicle goes uphill on a mountain road, it should change to a lower gear in a timely, accurate and rapid manner so as to avoid a situation in which driving at a high gear can reduce the power of the engine.

A. Right

B. Wrong

Answer：A

21. A motorized vehicle driver who uses other motorized vehicles license plate and vehicle license is subject to a 3-point penalty.

A. Right

B. Wrong

Answer：B

22. When the light switch is rotated to the position, the whole car lights turn on.

A. Right

B. Wrong

Answer：B

23. It lights to indicate that the handbrake may not loose in the end.

A. Right

B. Wrong

Answer：B

24. Max speed when pass the narrow road or bridge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer：C

25. The wrong measure to avoid tire blowout is to _________.

A. Reduce tire pressure

B. Check the tires regularly

C. Remove objects from tire tread grooves in a timely manner

D. Replace the tire that has cracks or deep cuts

Answer：A