1. When encountering stopping and waiting in turn or slow-moving vehicles in front, the motorized vehicle may _________.

A. borrow road to overtake

B. occupy the opposite lane

C. follow the vehicles in front

D. cut in the waiting vehicles

Answer：C

2. What is the Minimum speed in this lane?

A. 100km/hr

B. 110km/hr

C. 60km/hr

D. 90km/hr

Answer：D

3. This sign reminds the road in front changes to inseparate two ways section.

A. Right

B. Wrong

Answer：A

4. When the tire pressure is too low, the fast-running tire can change its shape like waves and increase its temperature, which in turn can cause ________.

A. Even lower tire pressure

B. Increases resistance to the vehicle

C. Tire blowout

D. Unstable tire pressure

Answer：C

5. How long is the period of probation after a motorized vehicle driver obtains his driving license for the first time or the permission to drive higher level vehicles.

A. 6 months

B. 12 months

C. 2 years

D. 3 months

Answer：B

6. Whats the meaning of this sign?

A. tunnel entry

B. observatory

C. mind side wind

D. wind vane

Answer：C

7. When driving a small vehicle downhill, the driver may coast down by stopping the engine.

A. Right

B. Wrong

Answer：B

8. When a vehicle passes a curve on a mountain road, the driver should reduce speed, honk and stick to the right.

A. Right

B. Wrong

Answer：A

9. When the driver is suspected of drinking or drunk in a traffic accident, preserve the scene and immediately report to the police.

A. Right

B. Wrong

Answer：A

10. The full mark of Driving Skills, Common Knowledge on Safe and Courteous Driving of the subject 3 test is 100, each of the passing mark is 80 and 90.

A. Right

B. Wrong

Answer：B

11. The safety pillow is used to protect the driver‘s head when there is a rear-end collision.

A. Right

B. Wrong

Answer：B

12. Whats the meaning of this sign?

A. section narrows on both sides

B. section for speed test

C. section for ascertaining the distance between the vehicles

D. pay attentions to keeping distance

Answer：D

13. When overtaking, the driver should try his best to increase the horizontal distance and,when necessary, may cross the solid line to overtake.

A. Right

B. Wrong

Answer：B

14. No U turn at this section.

A. Right

B. Wrong

Answer：B

15. When a vehicle is being overtaken by another vehicle, and there is a vehicle following behind, the driver should _____.

A. continue to speed up and run

B. turn slightly to the right side, keep a safe horizontal distance

C. run by road center

D. speed up to the right side to yield

Answer：B

16. What is the max speed on a road covered by ice and snow

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 20km/hr

Answer：C

17. After a vehicle enters the ramp, the driver should swiftly increase the speed to more than 60 kilometers per hour.

A. Right

B. Wrong

Answer：B

18. What kind of marking is the yellow broken line in the center of the road?

A. indicative marking

B. prohibitive marking

C. warning sign

D. auxiliary marking

Answer：A

19. Whats the meaning of this sign?

A. left one-way road

B. right one-way road

C. straight one-way road

D. yield if going to turn right

Answer：B

20. Which is subject to a 12-point penalty?

A. driving a motorized vehicle when driving license is temporarily detained

B. applying for reissuing the driving license by concealment or deception

C. not yielding to the school bus according to regulations

D. running with the license plate deliberately stained

Answer：D

21. It lights to remind that the driver has not buckled up.

A. Right

B. Wrong

Answer：A

22. What should a motorized vehicle has while running on the road?

A. a label of keeping distance

B. a label of reminding danger

C. a label of inspection

D. a label of product qualification

Answer：C

23. When passing an unmanned level crossing, the driver should ________.

A. Speed up and pass

B. Reduce speed and pass

C. Maintain the speed and pass

D. Stop, look and pass

Answer：D

24. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer：C

25. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer：C