1. Whats the meaning of this sign?

A. embankment road

B. steep uphill road

C. continuous up slopes

D. steep downhill road

Answer：D

2. Whats the meaning of this sign?

A. bypass at construction section

B. two-way traffic

C. bypass from left or right side

D. watch for danger

Answer：C

3. When reaching an intersection, a left-turning vehicle may enter the left-turn waiting area anytime.

A. Right

B. Wrong

Answer：B

4. It is a bad habit for a driver to put his left arm on the window of the vehicle or hold the gear lever in his right hand for a long time.

A. Right

B. Wrong

Answer：A

5. Traffic Police can detain the accident vehicle according to law if it needs to be collected evidence of the road accident.

A. Right

B. Wrong

Answer：A

6. A person whose driving license has been destroyed cannot drive a motorized vehicle.

A. Right

B. Wrong

Answer：A

7. The vehicle is allowed to pass the intersection ahead when the green light on.

A. Right

B. Wrong

Answer：A

8. When a vehicle goes uphill on a mountain road, it should change to a lower gear in a timely, accurate and rapid manner so as to avoid a situation in which driving at a high gear can reduce the power of the engine.

A. Right

B. Wrong

Answer：A

9. Whats the meaning of this sign?

A. an unmanned level crossing 150m ahead

B. an unmanned level crossing 100m ahead

C. a manned level crossing 100m ahead

D. a manned level crossing 150m ahead

Answer：A

10. The oil pressure of engine may be too high if it lights.

A. Right

B. Wrong

Answer：B

11. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer：A

12. Whats the meaning of this guide arrow?

A. left curve or need to merge with the left flow ahead

B. right curve or need to merge with the right flow ahead

C. merge with the left flow due to right side obstacle ahead

D. left curve or need to bypass from left side ahead

Answer：A

13. When a vehicle passes a school or a residential area, the driver should observe the signs and markings, go slowly and refrain from honking.

A. Right

B. Wrong

Answer：A

14. It lights to indicate that ______

A. the head and tail fog lights are turned on

B. front and rear width lights are turned on

C. the head lights are turned on

D. the hazard lights are turned on

Answer：B

15. Whats the meaning of this sign?

A. watch for wildlife

B. watch for animals

C. zoo park

D. opened pastoral area

Answer：A

16. Steering wheel will be locked if removing the key while the ignition switch is in the LOCK position.

A. Right

B. Wrong

Answer：A

17. Whats the meaning of this sign?

A. hump bridge

B. high outburst road

C. low-lying road

D. bump road

Answer：A

18. Whats the meaning of this sign?

A. watch for pedestrians

B. watch for children

C. school area

D. crosswalk

Answer：A

19. When a motorized vehicle crosses a non-motorized vehicle on a narrow road or a narrow bridge at night, the motorized vehicle should use the high beam light.

A. Right

B. Wrong

Answer：B

20. What marking is it?

A. A cross-hatched marking

B. prohibitive area

C. guide line

D. central circle

Answer：D

21. The main impact of mountain roads on safe driving is _______.

A. The traffic conditions are boring

B. The slopes are long, the curves are sharp and visibility range is shorter.

C. The traffic flow is heavy

D. The road signs are fewer

Answer：B

22. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer：A

23. The yellow lane-dividing line on the road is used to _____

A. allow to drive in left lane

B. separate the traffic flow in opposite directions

C. separate the traffic flow in the same direction

D. prohibit to cross the opposite lane

Answer：B

24. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer：A

25. Whats the meaning of this sign?

A. stop to yield

B. no stopping temporarily

C. no entry

D. no long stopping

Answer：A