1. Which part does this switch control?

A. windscreen defogger

B. windscreen wiper

C. the hazard lights

D. devices of lights and signals

Answer：B

2. If one drives an illegally assembled motorized vehicle, he should not only pay the fine, but also ________ .

A. be temporarily detained the driving license

B. be revoked the driving license

C. be held for criminal liabilities

D. be detained for less than 10 days

Answer：B

3. Must reduce the frequency of honking in this section.

A. Right

B. Wrong

Answer：B

4. How far away should the warning sign be placed in the coming direction when this vehicle breaks down and stops temporarily on the expressway?

A. beyond 150m

B. 50~150m

C. within 50m

D. 50~100m

Answer：A

5. What should the driver do if conditions permit when a following vehicle gives the overtaking signal on a road without a central line?

A. maintain the original speed

B. speed up

C. reduce speed, move to the right side and yield

D. immediately stop and yield

Answer：C

6. In which situation that a driver will not allowed to drive?

A. penalty points reach 10 points

B. penalty points reach 6 points

C. driving license lost or destroyed

D. driving license is nearly expired

Answer：C

7. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer：C

8. Driving a small passenger vehicle on the expressway, the minimum speed should not be less than 90 kilometers per hour.

A. Right

B. Wrong

Answer：B

9. What marking are the white broken lines in the circles?

A. small vehicles turning lines

B. lane connection lines

C. non-motorized vehicles guide lines

D. intersection guide line

Answer：D

10. Whats the meaning of this guide arrow?

A. changing to left lane

B. going straight ahead

C. left turn ahead

D. right turn ahead

Answer：C

11. The oil pressure of engine may be too high if it lights.

A. Right

B. Wrong

Answer：B

12. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer：D

13. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer：B

14. Whats the meaning of this sign?

A. the distance from the tunnel exit

B. the distance from the tunnel entry

C. the distance of following the vehicle in front in the tunnel

D. the whole length of the tunnel

Answer：A

15. Whats the meaning of this sign?

A. expressway left exit ahead

B. expressway destination ahead

C. expressway right exit ahead

D. expressway next exit ahead

Answer：D

16. A driver should observe the dynamic situation of the rear side vehicles before driving into the traffic flow from other road.

A. Right

B. Wrong

Answer：A

17. ABS system can keep the steering capability of the front wheels while providing maximum braking force when the vehicle conduct an emergency braking.

A. Right

B. Wrong

Answer：A

18. Whats the meaning of the double white broken lines in far front of the intersection?

A. waiting to run line

B. stopping and yield line

C. slowdown and yield line

D. left-turn waiting line

Answer：C

19. Which should be taken along while driving?

A. vocational qualification certificate

B. ID card

C. driving license

D. work permits

Answer：C

20. It lights to indicate enabling the floor and the front windscreen fan.

A. Right

B. Wrong

Answer：A

21. This sign reminds serious bump road ahead.

A. Right

B. Wrong

Answer：B

22. When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C

23. Pass the crossing as fast as possible if there is a red light at the intersection of a road or a level crossing.

A. Right

B. Wrong

Answer：B

24. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer：B

25. Driving on the expressway with full signs and marking, the driver should run in the lane and at the speed according to _________.

A. Signs and markings

B. Rules on road traffic safety

C. Vehicle manual

D. Local regulations

Answer：A