青海英文科目4考试题

1. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. reduce speed and pass slowly

B. pull over

C. stop

D. turn right

Answer:D

2. Whats the meaning of this sign?

A. Road traffic flow monitoring

B. Deceleration photographed area

C. Full section snapshot

D. Traffic monitoring equipment

Answer:D

3. When a vehicle passes a level crossing, the driver should use the low gear to pass and should not change gear halfway in order to avoid engine kill.

A. Right

B. Wrong

Answer:A

4. When encountering stopping in turn or slow-moving vehicles in front at an intersection where lanes are reduced, the motorized vehicle should _________.

A. enter the intersection from road shoulder by the right side of the vehicle in front

B. enter the intersection from the side of interspace

C. pass alternately with one vehicle each lane to enter the intersection

D. change to left lane and cut in to enter the intersection

Answer:C

5. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer:C

6. The doors of both sides are not closed if it lights.

A. Right

B. Wrong

Answer:A

7. What does this sign mean?

A. Reminding the side of a reservoir, lake or river ahead

B. Reminding the steep uphill road ahead

C. Reminding continuous two or more up slopes ahead

D. Reminding the steep downhill road ahead

Answer:B

8. If a motorized vehicle driver allows his vehicle to be driven by a person whose driving license has been detained, the traffic police will serve an oral warning.

A. Right

B. Wrong

Answer:B

9. You may speed up to go through the intersection in this case.Answer:

A. Right

B. Wrong

Answer:B

10. This sign indicates running slowly or stopping to let the vehicle on main road go first.

A. Right

B. Wrong

Answer:A

11. Before a vehicle enters an intersection, the driver should reduce speed, observe and make sure it is safe to do so.

A. Right

B. Wrong

Answer:A

12. When a vehicle runs on an expressway at the speed of 100 kilometers per hour, its safe distance from the vehicle in front is not less than 100 meters.

A. Right

B. Wrong

Answer:A

13. Whats the meaning of this sign?

A. steep downhill road

B. continuous up slopes

C. steep uphill road

D. embankment road

Answer:C

14. May watch car video in good road conditions.

A. Right

B. Wrong

Answer:B

15. It is not safe for a woman driver to wear high heels to drive a vehicle.

A. Right

B. Wrong

Answer:A

16. Use the high and low beam lights alternately when passing the crosswalk at night.

A. Right

B. Wrong

Answer:A

17. A person who has not obtained driving license drives a motorized vehicle, he will be held for legal liability.

A. Right

B. Wrong

Answer:A

18. What pedal is it?

A. clutch pedal

B. accelerator pedal

C. brake pedal

D. handbrake

Answer:C

19. Which is subject to a 6-point penalty?

A. violate the traffic lights

B. drive school bus without qualification

C. drive the vehicle which permission is different

D. drive after drink

Answer:A

20. When a vehicle goes downhill, the driver should properly control the speed and fully use the engine to brake.

A. Right

B. Wrong

Answer:A

21. What marking is the road mark in the circle?

A. crosswalk line

B. slowdown and yield line

C. stopping and yield line

D. intersection signal line

Answer:A

22. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer:A

23. It flashes when breaking down.

A. Right

B. Wrong

Answer:B

24. It lights when turning on the front fog light.

A. Right

B. Wrong

Answer:B

25. It lights to indicate that ______

A. charge current is too large

B. damaged battery

C. ammeter malfunction

D. charging circuit malfunction

Answer:D