1. A driver who drives an illegally assembled motorized vehicle is subject to ______ .

A. being held for criminal liabilities according to law

B. a fine of 200 yuan ~ 2,000 yuan

C. being revoked the vehicle license

D. being detained for less than 15 days

Answer：B

2. This sign warns the driver to run slowly with care and beware of the vehicles from horizontal road.

A. Right

B. Wrong

Answer：A

3. What is the max speed on this highway?

A. 30km/hr

B. 40km/hr

C. 50km/hr

D. 70km/hr

Answer：D

4. Whats the meaning of this sign?

A. stopping temporarily is allowed

B. long stopping is allowed

C. no long stopping

D. no stopping

Answer：D

5. Whats the meaning of the yellow broken line on curbstone?

A. no temporary stopping

B. no taking and dropping people

C. no loading and unloading cargos

D. no long stopping

Answer：D

6. How to pass when encountering this situation at the intersection?

A. make sure it is safe to pass

B. turn right and speed up to pass

C. speed up and pass straight

D. turn left and speed up to pass

Answer：A

7. When the two red lights at a level crossing flash alternately, the vehicles should stop to wait.

A. Right

B. Wrong

Answer：A

8. What kind of violation does the vehicle have while temporarily stopping by the roadside?

A. stop in the crosswalk

B. stop more than 30cm from the roadside

C. stop in the section with no stopping marking

D. stop occupying the lane for non-motorized vehicles

Answer：A

9. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer：A

10. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer：D

11. When overtaking, the driver should ________ if the vehicle in front refuses to reduce speed or yield.

A. Follow closely and find chance to overtake again

B. Stop overtaking

C. Speed up and continue to overtake

D. Continuously honk and speed up to overtake

Answer：B

12. If a motorized vehicle driver has caused a major traffic accident in violation of the traffic regulations which has caused human death due to his escaping, the driver is subject to a prison term of 3 years ~ 7 years.

A. Right

B. Wrong

Answer：B

13. A front tire blowout is very dangerous. The vehicle will immediately turn to the side where the tire is blown out and have a direct impact on the drivers control of the steering wheel.

A. Right

B. Wrong

Answer：A

14. Whats the meaning of this sign?

A. going straight and right turn

B. going straight and left turn

C. no going straight and no left turn

D. right turn and left turn only

Answer：B

15. If the license plate of a motorized vehicle has been destroyed, the owner of the vehicle should apply for reissuing or changing to the vehicle management station at the registration place.

A. Right

B. Wrong

Answer：A

16. This sign reminds the lane or the road narrows on the left side ahead.

A. Right

B. Wrong

Answer：A

17. What is the max speed on the expressway when the visibility is lower than 100 meters?

A. less than 40km/hr

B. less than 60km/hr

C. less than 80km/hr

D. less than 90km/hr

Answer：A

18. It lights to remind that engine oil needs to be filled.

A. Right

B. Wrong

Answer：B

19. It lights to indicate that the handbrake may not loose in the end.

A. Right

B. Wrong

Answer：B

20. What is the meaning of this sign?

A. provincial highway No.

B. national highway No.

C. county road No.

D. township road No.

Answer：A

21. If a vehicle may encounter a vehicle coming in the opposite direction in the course of overtaking, the driver should speed up in advance and overtake.

A. Right

B. Wrong

Answer：B

22. Driving a small passenger vehicle on the expressway, the minimum speed should not be less than 90 kilometers per hour.

A. Right

B. Wrong

Answer：B

23. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer：D

24. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer：C

25. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer：A