1. What should the driver do if conditions permit when a following vehicle gives the overtaking signal on a road without a central line?

A. maintain the original speed

B. speed up

C. reduce speed, move to the right side and yield

D. immediately stop and yield

Answer：C

2. When the green arrow for a lane is on and there are still pedestrians in the crosswalk before the vehicle, the driver should ___________.

A. Directly start up and pass

B. Start up and bypass the pedestrians from behind

C. Start up and bypass before the pedestrians

D. Start up after the pedestrians have passed

Answer：D

3. Whats the meaning of this sign?

A. U turn lane

B. bypassing lane

C. lanes for going in different directions

D. left-turn lane

Answer：A

4. When a vehicle has to stop on an expressway due to a vehicle trouble, the driver should place a breakdown warning sign beyond ______ m behind the vehicle.

A. 25

B. 150

C. 100

D. 50

Answer：B

5. Whats the meaning of this sign?

A. expressway exit ahead

B. expressway entry ahead

C. expressway ending ahead

D. expressway beginning ahead

Answer：C

6. It lights to remind that engine needs to add oil.

A. Right

B. Wrong

Answer：B

7. After starting the engine, it lights to indicate that ______

A. engine main oil way blockage

B. engine oil pressure is too low

C. engine crankshaft box leaks

D. engine oil pressure is too high

Answer：B

8. It lights if left door is not closed.

A. Right

B. Wrong

Answer：B

9. When a vehicle approaches a crosswalk, the driver should ________.

A. Speed up and pass

B. Stop immediately

C. Honk to indicate the pedestrians to yield

D. Observe the movement of pedestrians and non-motorized vehicles, make sure it is safe before passing

Answer：D

10. What is the max speed when passing a level crossing?

A. 15km/hr

B. 20km/hr

C. 30km/hr

D. 40km/hr

Answer：C

11. When driving in a rainy day, the driver should _____ when a pedestrian holding umbrella or in raincoat is walking on the highway.

A. Continuously honk to indicate him to yield

B. Speed up and bypass

C. Honk in advance and properly reduce speed

D. Drive at the normal speed

Answer：C

12. Whats the meaning of this sign?

A. minimum speed limit is 50km/hr

B. maximum speed limit is 50km/hr

C. the height is 50m

D. the altitude is 50m

Answer：A

13. Whats the meaning of this sign?

A. line guide signs

B. lane merging guide signs

C. lane branching guide signs

D. turning guide signs

Answer：A

14. No turning right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer：B

15. How to do in this intersection?

A. wait in the cross-hatched marking area

B. stop and wait outside the intersection

C. follow the vehicle in front and pass

D. wait inside the intersection

Answer：B

16. Whats the meaning of this sign?

A. embankment road

B. dangerous hillside road

C. rock-falling road

D. cliffside road

Answer：B

17. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

A. Right

B. Wrong

Answer：A

18. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. turn right

B. change lane

C. reduce speed and pass slowly

D. pull over

Answer：C

19. What marking is the triagle filled area in the circle?

A. stop line

B. deceleration line

C. guide line

D. cross-hatched marking

Answer：C

20. How to run through this intersection?

A. honk to let it yield

B. directly speed up to make a turn

C. reduce speed and turn slowly

D. yield the car coming from left

Answer：D

21. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer：C

22. How to pass this intersection?

A. keep the speed and go through

B. honk to urge

C. reduce speed and go through slowly

D. speed up and go through

Answer：C

23. It lights to indicate that ______

A. the head and tail fog lights are turned on

B. front and rear width lights are turned on

C. the head lights are turned on

D. the hazard lights are turned on

Answer：B

24. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer：A

25. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer：C