1. Whats the meaning of the white solid lines at the edge of the carriageway on both sides of the road?

A. Vehicles may cross temporarily

B. Vehicles are not allowed to cross.

C. Motorized vehicles may cross temporarily.

D. Non-motorized vehicles may cross temporarily

Answer：B

2. When a motorized vehicle breaks down on the expressway, the driver should place a warning sign 50 meters ~ 100 meters in the coming direction.

A. Right

B. Wrong

Answer：B

3. When the motor vehicle installed ABS system brakes, the braking distance will be greatly shortened, so you do not have to keep a safe distance between vehicles.

A. Right

B. Wrong

Answer：B

4. Whats the meaning of this sign?

A. T-shaped intersection

B. branching intersection

C. reduce speed to pass

D. dead-end road

Answer：D

5. Whats the meaning of this sign?

A. expressway emergency strip

B. expressway yielding area

C. expressway bus station

D. expressway parking area

Answer：A

6. When a motorized vehicle returns to the original lane after overtaking, the driver should turn on the right-turn signal.

A. Right

B. Wrong

Answer：A

7. The vehicle is allowed to _______ at this intersection.

A. go straight

B. turn right

C. turn left

D. go straight or turn left

Answer：B

8. The vehicle with ABS system can minimize the braking distance when driving on a road covered by ice and snow.

A. Right

B. Wrong

Answer：B

9. What does the traffic light mean?

A. no right turn

B. intersection warning

C. going straight is allowed

D. speed up and pass

Answer：B

10. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer：C

11. When encountering stopping and waiting in turn or slow-moving vehicles in front, the motorized vehicle may _________.

A. borrow road to overtake

B. occupy the opposite lane

C. follow the vehicles in front

D. cut in the waiting vehicles

Answer：C

12. What is the max speed when passing a level crossing?

A. 15km/hr

B. 20km/hr

C. 30km/hr

D. 40km/hr

Answer：C

13. Whats the meaning of the white rectangle marking?

A. special space for taxicabs to take and drop passengers

B. horizontal parking space

C. inclined parking space

D. vertical parking space

Answer：B

14. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer：C

15. The traffic lights allow the vehicle to ______

A. turn right

B. stop and wait

C. turn left

D. go straight

Answer：A

16. Going though the intersection according to the traffic lights when traffic lights and command of the traffic police are inconsistency.

A. Right

B. Wrong

Answer：B

17. Motorized vehicles should pass the intersections according to the traffic signals.

A. Right

B. Wrong

Answer：A

18. What causes the rear-end collision?

A. not observe through the rear-view mirror while the vehicle in front brakes

B. the vehicle in front brakes suddenly

C. distance from the vehicle in front is too close when the rear vehicle overtakes

D. not maintain a safe distance from the vehicle in front

Answer：D

19. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer：A

20. How to pass this intersection?

A. not reduce speed to pass

B. speed up to pass as soon as possible

C. slide over in the neutral gear

D. reduce speed or stop to observe

Answer：D

21. Whats the meaning of this sign?

A. No passing

B. driving at reduced speed

C. time limit for entering

D. no entering

Answer：A

22. What is this manipulation device?

A. air conditioner switch

B. ignition switch

C. wiper switch

D. light switch

Answer：B

23. When encountering disabled people obstructing the traffic, the driver should voluntarily reduce speed and yield.

A. Right

B. Wrong

Answer：A

24. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer：B

25. Whats the meaning of this sign?

A. left-turn lane

B. straight-going lane

C. right-turn lane

D. lanes for going in different directions

Answer：D