1. What kind of violation does the vehicle have while temporarily stopping by the roadside?

A. stop in the crosswalk

B. stop more than 30cm from the roadside

C. stop in the section with no stopping marking

D. stop occupying the lane for non-motorized vehicles

Answer：A

2. If a motorized vehicle causes a traffic accident on the expressway and cannot to run normally, the vehicle should be towed by a rescue vehicle or a tow truck.

A. Right

B. Wrong

Answer：A

3. Whats the meaning of this sign?

A. no entering the intersection

B. no right turn

C. no changing lane

D. no U turn

Answer：B

4. When a vehicle coming in the opposite direction suddenly overtakes and occupies your lane, the correct way to deal with this situation is to __________.

A. Obstruct the way of that vehicle

B. Maintain the original speed

C. Reduce speed and avoid as much as possible, till stop

D. Speed up and go forward

Answer：C

5. At this position, the motorized vehicle can continue to go through if the front wheels have passed the stop line.

A. Right

B. Wrong

Answer：B

6. When a vehicle passes a crosswalk, the driver should yield to the pedestrians.

A. Right

B. Wrong

Answer：A

7. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer：A

8. When a vehicle goes downhill on a mountain road, it is not allowed to overtake.

A. Right

B. Wrong

Answer：A

9. Violating the law and regulations on road traffic safety is the act of violation of the law.

A. Right

B. Wrong

Answer：A

10. It lights to remind that the driver has not buckled up.

A. Right

B. Wrong

Answer：A

11. When encountering an ambulance rushing in the same lane in the opposite direction, the driver should ________.

A. Move to the road side, reduce speed or stop to yield

B. Drive on by using another lane

C. Speed up and change lane to avoid

D. Continue to go in the original lane

Answer：A

12. When crossing each other at night, how far should change the high beam lights to low beam lights?

A. not need to change lights

B. beyond 150m

C. within 100m

D. within 50m

Answer：B

13. Whats the meaning of this sign?

A. school area

B. watch for children

C. crosswalk

D. watch for pedestrians

Answer：B

14. You should speed up to go through the railway crossing in this case.

A. Right

B. Wrong

Answer：B

15. Turn on the right-turn signal and return immediately to the original lane afterovertaking.

A. Right

B. Wrong

Answer：B

16. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer：A

17. Whats the meaning of the yellow broken and solid lines in the middle of the road?

A. no crossing the lines on the side of the broken line

B. no crossing the lines on the side of the solid line

C. allowed to cross the lines on the side of the solid line

D. allowed to cross the lines on both sides

Answer：B

18. Whats the meaning of this sign?

A. no yielding

B. yield while crossing each other

C. reduce speed and yield

D. stop to yield

Answer：C

19. Whats the meaning of this sign?

A. intersection ahead

B. interchange ahead

C. Y-shaped intersection ahead

D. ring intersection ahead

Answer：B

20. The doors of both sides are not closed if it lights.

A. Right

B. Wrong

Answer：A

21. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer：B

22. Steering wheel will be locked if removing the key while the ignition switch is in the LOCK position.

A. Right

B. Wrong

Answer：A

23. The subject 3 test is divided into two parts including Driving Skills, Common Knowledge on Safe and Courteous Driving.

A. Right

B. Wrong

Answer：A

24. The validity of the driving license which is initially applied for is 4 years.

A. Right

B. Wrong

Answer：B

25. When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C