1. Whats the meaning of this sign?

A. No passing

B. driving at reduced speed

C. time limit for entering

D. no entering

Answer：A

2. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer：A

3. After starting the engine, it lights to indicate that ______

A. fuel pump abnormal or malfunction

B. ignition system malfunction

C. fuel supply system is abnormal

D. fuel in tank reaches the minimum level

Answer：D

4. Stop and yield to the pedestrians under this situation.

A. Right

B. Wrong

Answer：A

5. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. turn right

B. change lane

C. reduce speed and pass slowly

D. pull over

Answer：C

6. Which is correct when changing lane?

A. turn on the directional signal and turn left quickly

B. reduce speed properly when entering the left lane

C. cannot interfere other vehicles

D. speed up to enter the left lane

Answer：C

7. Whats the meaning of this sign?

A. water channel

B. bridge

C. tunnel

D. Culvert

Answer：C

8. Whats the meaning of the white solid lines at the edge of the carriageway on both sides of the road?

A. Vehicles may cross temporarily

B. Vehicles are not allowed to cross.

C. Motorized vehicles may cross temporarily.

D. Non-motorized vehicles may cross temporarily

Answer：B

9. Whats the meaning of this sign?

A. intersection ahead

B. interchange ahead

C. Y-shaped intersection ahead

D. ring intersection ahead

Answer：D

10. The main impact of the road conditions in icy and snowy weather is ______.

A. The electric equipment can easily get wet and cause short circuit

B. The visibility is lower and the field of vision is blurred

C. The resistance to the vehicle increases

D. Poor braking performance and Side pulling

Answer：D

11. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer：B

12. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer：B

13. The vehicle is allowed to _______ at this intersection.

A. go straight

B. turn right

C. turn left

D. go straight or turn left

Answer：B

14. Whats the meaning of this sign?

A. reduce speed and yield

B. variable lane

C. separated road

D. two-way traffic

Answer：D

15. When the vehicles cross each other at night, the driver may continuous change lights to remind the vehicle coming in the opposite direction and at the same should reduce speed and go forward or stop on the right side.

A. Right

B. Wrong

Answer：A

16. When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C

17. It lights when ABS is open.

A. Right

B. Wrong

Answer：B

18. If a front tire blowout has caused a turn in direction, the driver should not avoid excess adjustment. Instead, he should control the direction of the vehicle, ____, and slowly reduce the speed of the vehicle.

A. Apply emergency braking

B. Use the handbrake

C. Gently depress the brake pedal

D. Swiftly depress the brake pedal

Answer：C

19. This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. wait to turn left

B. pull over

C. turn right

D. reduce speed and pass slowly

Answer：C

20. Whats the meaning of this sign?

A. continuous down slopes

B. steep downhill road

C. steep uphill road

D. continuous up slopes

Answer：A

21. What marking is it?

A. A cross-hatched marking

B. prohibitive area

C. guide line

D. central circle

Answer：D

22. A driver may drive on the road a motorized vehicle overhauled which has reached the scraped standard.

A. Right

B. Wrong

Answer：B

23. When bicycles ahead obstruct the traffic flow, the driver may honk to remind them,speed up and bypass.

A. Right

B. Wrong

Answer：B

24. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer：A

25. When driving in thick fog causing poor visibility on the expressway, the driver should apply emergency braking to stop at once.

A. Right

B. Wrong

Answer：B