1. One shall not drive a motorized vehicle during the period of deferred license checking due to military service, abroad and other reasons.

A. Right

B. Wrong

Answer：A

2. Whats the meaning of this sign?

A. stop to yield

B. no stopping temporarily

C. no entry

D. no long stopping

Answer：A

3. It lights to indicate that engine oil may be insufficient.

A. Right

B. Wrong

Answer：A

4. Whats the meaning of this park marking?

A. special stopping and waiting area

B. special getting-on and getting-off area

C. time limit parking

D. fixed direction parking

Answer：D

5. The age limit of applying for small vehicle is ________ .

A. 18~60 years old

B. 18~70 years old

C. 24~70 years old

D. 21~50 years old

Answer：B

6. As the traffic flow at an interchange is generally one-way, the vehicles do not have to reduce speed when passing.

A. Right

B. Wrong

Answer：B

7. How to run if this traffic light continuously flashes?

A. speed up and pass as soon as possible

B. stop by the side to wait

C. look and make sure it is safe to pass

D. apply emergency braking

Answer：C

8. What is this instrument?

A. speed and mileage meter

B. engine tachometer

C. top speed meter

D. fuel consumption / 100 km

Answer：A

9. The hazard lights can be used when ________

A. encountering traffic congestion

B. following a vehicle on road

C. the vehicle breaks down and stops

D. leading the vehicle behind

Answer：C

10. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer：D

11. What pedal is it?

A. clutch pedal

B. brake pedal

C. handbrake

D. accelerator pedal

Answer：A

12. It is a bad habit for a driver to put his left arm on the window of the vehicle or hold the gear lever in his right hand for a long time.

A. Right

B. Wrong

Answer：A

13. This sign indicates running slowly or stopping to let the vehicle on main road go first.

A. Right

B. Wrong

Answer：A

14. When a vehicle reaches a muddy or burst-and-muddy section, the driver should stop,observe and select the level and solid section or the section with vehicle tracks.

A. Right

B. Wrong

Answer：A

15. When driving on a road covered by ice and snow, the driver must reduce speed and increase the safe distance.

A. Right

B. Wrong

Answer：A

16. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer：B

17. It lights to indicate that ______

A. left-turn signal flashes

B. front and rear width lights light on

C. front and rear width lights light on

D. right-turn signal flashes

Answer：A

18. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer：B

19. In the course of reversing, the driver should move slowly, observe the conditions on both sides and in the rear and be ready to stop anytime.

A. Right

B. Wrong

Answer：A

20. Whats the meaning of the yellow filled markings on the road?

A. closing to the obstacle

B. closing narrowed road

C. closing the moving obstacle

D. Marking of approaching a narrow road

Answer：A

21. When overtaking a vehicle stopping on the right side, the driver should ________ in case that vehicle starts up suddenly or opens the door.

A. Speed up and pass

B. Keep honking

C. Maintain the normal speed

D. Keep a safe horizontal distance from that vehicle, reduce speed and pass

Answer：D

22. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer：C

23. How to pass this intersection?

A. not reduce speed to pass

B. speed up to pass as soon as possible

C. slide over in the neutral gear

D. reduce speed or stop to observe

Answer：D

24. How to drive through the intersection without traffic lights?

A. reduce speed and go slowly

B. speed up and pass

C. let large vehicle go first

D. let the left vehicle go first

Answer：A

25. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer：B